Why UAE water needs filtering — and exactly how BOTANVÈ's 3-stage system removes chlorine, heavy metals, and hard water minerals from every shower.
UAE municipal water is heavily chlorinated and extremely mineral-hard. Safe to drink — but the chlorine, heavy metals, and hard minerals remain when it reaches your shower, and that's where the damage happens. Hot water opens your pores and vaporises chlorine into steam you inhale, while hard water minerals cling to hair follicles and skin, stripping natural oils.
Chlorine and hard water minerals strip follicle oils, causing brittleness, colour fade, and hair fall.
Chlorine destroys the skin's moisture barrier. Hard water leaves a mineral film causing tightness and itching.
Chlorine byproducts (THMs) are inhaled as steam. Heavy metals from old pipes absorb through open pores.
Results may vary. BOTANVÈ is not a medicine or medical treatment — it's a water filtration system that reduces chlorine and other elements present in unfiltered tap water, which can help support healthier-feeling hair and skin over time.
BOTANVÈ passes every drop through three dedicated filtration media, each engineered for a specific category of UAE water contaminants.
The ACF Rod uses activated carbon fibre — significantly higher surface area than granular activated carbon — to adsorb chloramines, trihalomethanes (THMs), volatile organic compounds (VOCs), and any residual chlorine odour, even at typical shower flow rates. This stage is responsible for the clean, fresh smell of BOTANVÈ-filtered water.
KDF-55 is a high-purity copper-zinc alloy that uses a redox electrochemical reaction to break down free chlorine into harmless chloride ions. It simultaneously removes heavy metals — lead, mercury, arsenic, copper, cadmium — and inhibits bacterial growth throughout the cartridge's 3-month life.
UAE water has some of the highest hardness levels globally. Calcium Sulfate Balls neutralise and buffer excess calcium and magnesium ions — the minerals responsible for limescale on taps, the dry feeling after showering, and brittle hair. After this stage, water is perceptibly softer with no mineral residue.
BOTANVÈ fits inline between your shower arm and shower head — any brand, any type. No tools, no leaks, no disruption to your bathroom.
Unscrew counter-clockwise from the shower arm. Hand-tight on most models — no tools needed.
Screw the housing onto the exposed arm thread, clockwise, hand-tight. Universal G1/2 thread fits all standard shower arms.
Screw your shower head onto the BOTANVÈ outlet — same as before. Works with fixed, handheld, and rain-head types.
Run cold water for 30 seconds before first use to clear any fine particles from manufacturing.
What UAE customers experience after switching to filtered showers.
| What you notice | Without BOTANVÈ | With BOTANVÈ |
|---|---|---|
| Chlorine smell | Strong — every shower | Completely gone |
| Hair condition | Dry, brittle, falling | Soft, strong, hydrated |
| Skin after shower | Tight, dry, itchy | Smooth, moisturised |
| Eczema / sensitivity | Frequently triggered | Significantly reduced |
| Chlorine absorption | High via skin & inhalation | 99% removed by KDF-55 |
| Heavy metals | Present — absorbed by skin | Removed by KDF-55 |
| Hard water minerals | Very high — limescale & dryness | Softened by Calcium Sulfate |
| Water smell & feel | Harsh, chemical, drying | Clean, soft, fresh |
After 3 months of regular use, the KDF-55, Calcium Sulfate Balls, and ACF Rod begin to saturate. Signs it's time: water starts smelling faintly of chlorine again, or skin and hair feel less soft. Replacing on schedule keeps all three stages at full capacity.
Join thousands of UAE residents who've switched to filtered showers. Free delivery. 7-day returns.
